Morrison S201 Manual do Operador descarregar pdf (Página 12)

BARTELL MORRISON INC. BARTELL MORRISON (USA) LLC

375 ANNAGEM BLVD, MISSISSAUGA, ONTARIO, CANADA, L5T 3A7, 905-364-4200 FAX 905-364-4201

200 COMMERCE DRIVE, FREEHOLD, NEW JERSEY, USA, 07728, 732-566-5400 FAX 732-566-5444

Created: 07/04

Revised: 06/14

4.0 SPRAYER ASSEMBLY

Your new Power Sprayer will arrive with everything you

need in one shipping carton. Be sure to examine the

content to be certain that the following items were

included:

Return Hose: ½” hose/pipe

Suction Hose: ¾” hose/pipe

Sprayer Wand Assembly: 25 ft. of 3/8” hose and (2)

3/8” pipes with a coupler

1. Remove the sprayer from the carton and place it on

the curing drum you will be using. The sprayer

should be mounted so that the openings on the drum

are accessible on either side of the sprayer. Tighten

the hold down tabs on the sprayer to the drum.

2. Attach the suction hose/pipe to the sprayer using the

fitting mounted directly to the pump. (See Fig. 4)

3. Attach the fitting end of the return hose/pipe to the

sprayer using the ½” connection on the spray block

assembly. (See Fig. 5)

4. Join the two section of the sprayer wand together

using the pipe coupling provided. (See Fig. 6)

5. Attach the spray hose to the last fitting on the

sprayer block assembly. (See Fig. 6)

You are now ready to begin operation of the sprayer.

Fig. 4 - Suction Hose

Connection

Fig. 5 - Return

Hose Connection

Fig. 6 - Spray Hose &

Wand Connection

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Sem comentários

Morrison S201 Manual do Operador Página 12